300L PROFESSIONAL Whisky Still + GIN BOX

300L PROFESSIONAL Whisky Still + GIN BOX

Introducing the 300L PROFESSIONAL Whisky Still + GIN BOX, a high-quality, high-performance piece of equipment designed for distilling gin, whisky and rum. It is particularly suitable for working with grain washes, other fermented liquids and molasses.

This model stands out for its professional construction using 2.5 mm thick hammered copper and its comprehensive instrumentation, which allows different parameters to be monitored throughout the distillation process. It also includes a GIN BOX with a botanicals basket, expanding the range of ways in which the equipment can be used.

⚗️ Capacity and yield

This model has a total capacity of 330 litres and a usable boiler capacity of 300 litres. The approximate distillation time is 5 to 6 hours.

Based on an initial wash with an alcohol strength of 10% ABV, the estimated yield is between 10% and 15% of the usable capacity, equivalent to approximately 30–45 litres of distillate per run.

The final quantity obtained and the duration of each distillation may vary depending on the characteristics of the wash and the operating conditions.

🔨 Professional hammered copper construction

The still is made from 2.5 mm thick hammered copper sheet, a material traditionally used in distillation equipment. Its hammered finish gives it an elegant and distinctive appearance. It features bright brass handles and nuts. All joints are soldered to provide a solid, strong and durable construction.

🌿 GIN BOX with botanicals basket

This model includes a GIN BOX fitted with a botanicals basket, designed to expand the possibilities for making gin. It allows distillation by vapour infusion or maceration, adapting to different preferences and working methods.

The equipment also includes a transfer pipe, which allows distillation to be carried out without using the GIN BOX. This means you can work with the botanicals box or leave it out, depending on the requirements of each distillation run.

🌡️ Instrumentation and distillation control

The equipment is fitted with several measuring instruments at different points, allowing the main variables to be monitored throughout the distillation process:

🌡️ Two large thermometers (0–120 °C): one is installed in the still head to monitor the temperature of the vapours as they pass through, while the other is fitted to the condenser to monitor the cooling system temperature.

🌡️ Vertical thermometer in the boiler (0–120 °C): allows the temperature of the wash to be monitored during heating and distillation.

🔧 Pressure gauge in the boiler: allows the internal pressure of the equipment to be monitored.

🍶 Alcoholmeter with thermometer: allows the alcohol strength of the distillate to be measured and its temperature to be monitored. A dedicated alcoholmeter stand is also included for convenient use.

🛡️ Safety and maintenance features

The 300L PROFESSIONAL Whisky Still + GIN BOX incorporates several features designed to facilitate operation and maintenance:

🔒 Safety valve in the boiler: fitted to help protect the equipment against excessive pressure.

🔩 Brass connections between the boiler and still head: provide the connection and help ensure a secure seal between both components.

🚪 Access door in the boiler: made from stainless steel, it provides access to the interior for cleaning and maintenance.

💧 2.5-inch drain pipe with valve: allows any remaining liquid to be drained from the boiler. It is made from stainless steel or brass.

🔥 Professional burner and included supports

The equipment includes a professional gas burner with a diameter of 60 cm, compatible with butane and propane. It can also be supplied for use with natural gas on request.

In addition, iron support stands for the boiler, GIN BOX and condenser are supplied, providing stability and allowing the different components of the equipment to be correctly positioned.

🥃 A professional still for gin, whisky and rum

The 300L PROFESSIONAL Whisky Still + GIN BOX is designed for those looking for a large-capacity, versatile still for distilling gin, whisky and rum. Its 2.5 mm hammered copper construction, 300-litre usable capacity, GIN BOX with botanicals basket, comprehensive instrumentation and safety features make it a professional, fully equipped solution for a variety of distillation processes.

📦 Made to order

This model is made to order. The estimated manufacturing lead time is 30 to 45 days.