100L Whisky Still with Double Thumper

🥃 100L Whisky Still with Double Thumper

The 100L Whisky Still with Double Thumper is designed for making whisky, gin, rum and other craft spirits. Its traditional copper construction, combined with a modular distillation system, offers great versatility and allows the process to be adapted to the requirements of each distillation.

Made from 2 mm thick hammered copper, it features polished brass handles and nuts, with all joints fully soldered. Its 100-litre working capacity delivers an approximate yield of 10 to 15 litres per distillation without thumpers, based on a fermented wash with an alcohol content of 10% ABV. The estimated distillation time is between 3 and 4 hours.

🥃 Maximum versatility with the double-thumper system

This equipment offers great flexibility, as it can be used as a traditional still, with one thumper or with both thumpers, adapting to the requirements of each distillation.

The double-thumper system allows the vapours to undergo progressive redistillation before reaching the condenser. This configuration can increase the alcohol strength of the distillate. In addition, both thumpers can be used to aromatise the vapours with botanicals, fruit, spices or other ingredients, also functioning as aromatic chambers similar to a GIN BOX.

Thanks to this modular configuration, you can choose whether to distil without thumpers, with one or with both, and add aromatic ingredients according to the desired result.

The stated yields and alcohol strengths are approximate values. For easier maintenance, both thumpers and the condenser are fitted with their own drain tap, allowing quick emptying and easier cleaning after each distillation.

✨ Why choose this still?

🔄 Modular configuration: can be used without thumpers, with one or with both.

🥃 Boiler with a 100-litre working capacity.

🥃 Double-thumper system to increase the alcohol strength and add aromas during distillation.

🌿 Both thumpers can be used as GIN BOX-style aromatic chambers for adding botanicals, fruit and spices.

🔥 Made from 2 mm thick hammered copper.

🌡️ Four analogue thermometers (0-120 °C) to monitor the temperature throughout the process.

🧪 Large alcoholmeter (0-100% ABV), supplied with a support.

🚰 Independent drain taps on both thumpers and the condenser for easier cleaning.

⚙️ All joints are fully soldered.

🔥 Professional gas burner, 46 cm in diameter, suitable for butane and propane, with the option of adapting it for natural gas on request.

🏗️ Separate metal supports for the boiler, both thumpers and the condenser.

📋 Technical specifications

Boiler working capacity: 100 litres.

Total capacity: 110 litres.

Material: 2 mm thick hammered copper.

Finish: polished brass handles and nuts.

Approximate distillation time: 3-4 hours.

Yield without thumpers: 10-15 litres per distillation, based on a fermented wash with an alcohol content of 10% ABV.

Operating configurations: without thumpers, with 1 thumper or with 2 thumpers.

Thermometers: 4 analogue thermometers (0-120 °C).

Alcoholmeter: 0-100% ABV, supplied with a support.

Burner: professional gas burner, 46 cm in diameter.

Fuel: butane, propane or natural gas on request.

Drain taps: 2 on the thumpers and 1 on the condenser.

📦 Equipment included

✔️ Whisky-style copper still with a 100-litre boiler.

✔️ Two thumpers.

✔️ Condenser.

✔️ Four analogue thermometers.

✔️ Alcoholmeter with support.

✔️ Professional gas burner.

✔️ Metal supports for the boiler, both thumpers and the condenser.

🥃 A versatile still for different distillation processes

💡 Thanks to its traditional copper craftsmanship, modular configuration and comprehensive equipment, this still can be used as a traditional still, with a single thumper or with the double-thumper system. A versatile solution that allows you to adapt each distillation and control the characteristics of the spirit produced.