- -10%
⚗️ The 250L GAS Whisky Distillery is designed for the professional distillation of whisky, gin, rum and other spirits.
🥃 Usable capacity of 250 litres (280 litres total), with an approximate yield of 25–40 litres per distillation.
🔺 Features a conical still head to promote rectification during distillation and help enhance the aromas.
🔥 Made from 2.5 mm hammered copper, with a professional gas burner and a high-performance tubular condenser.
✨ Made to order
📩 Request your personalized quote
⏱️ Check delivery times
Security Policy
Delivery Policy
Return Policy
Introducing the 250L GAS Whisky Distillery, designed for the professional distillation of whisky, gin, rum and other spirits. This exclusive model is carefully crafted from high-quality materials and equipped with all the accessories needed to ensure an efficient and controlled distillation process.
Its distinctive design features a conical still head, setting it apart from other models. This design promotes rectification during distillation and helps enhance the aromas of the distillate.
The conical still head, characteristic of Northern European distillery designs, promotes rectification during the distillation process and helps concentrate aromas. This design makes it possible to obtain a distillate with a more defined aromatic profile.
This distillery has a total capacity of 280 litres and a usable capacity of 250 litres. The estimated distillation time is 5 to 6 hours, with an approximate yield of 25 to 40 litres per distillation.
This yield represents approximately 10–15% of the usable capacity and is calculated based on a fermented wash with an alcohol content of 10% ABV.
The distillery is made from 2.5 mm hammered copper sheet, a material that combines strength with an attractive finish. The handles and nuts are made from polished brass, and all joints are soldered to ensure a robust and durable construction.
🌡️ Vertical thermometer, 0–120 °C: installed in the boiler to monitor the wash temperature.
🌡️ Two large thermometers, 0–120 °C: one installed on the still head to monitor vapour temperature and the other on the condenser to monitor cooling temperature.
🛡️ Safety valve: installed on the boiler to prevent excessive pressure.
📊 Pressure gauge: installed on the boiler to monitor internal pressure.
💧 Automatic cleaning system: integrated into the boiler and still head to make internal cleaning easier.
🔍 4 inspection sight glasses: two on the boiler and two on the still head, made of stainless steel and designed to allow the inside of the equipment to be viewed during the distillation process.
🔩 Discharge pipe with a 2.5-inch valve: installed on the boiler to drain the remaining liquid. Available in stainless steel or brass.
🔗 Brass connections: connect the boiler to the still head and ensure a secure seal.
🚪 Stainless steel access door: installed on the boiler to provide easy access to its interior.
❄️ High-performance tubular condenser: designed to reduce distillation time and provide greater control over the cooling process.
🥃 Alcoholmeter, 0–100%, with thermometer: for measuring the alcohol strength of the distillate.
🔬 Alcoholmeter holder with a tempered glass dome: makes it easier to measure the alcohol strength.
🔥 Professional gas burner, 60 cm in diameter: compatible with butane, propane or natural gas, according to the customer's preference.
🛠️ Iron supports: for the boiler and condenser.
The 250L GAS Whisky Distillery is made to order, with an estimated manufacturing time of 30–45 days.
Modifications and customisations can be requested to adapt the equipment to each customer's requirements, provided they are agreed before manufacturing begins.
FICHA TÉCNICA
Download (561.67KB)TECHNICAL SHEET
Download (552.34KB)FICHE TECHNIQUE
Download (556.71KB)DATENBLATT
Download (605.11KB)SCHEDA DATI
Download (553.39KB)
⚗️ The 250L GAS Whisky Distillery is designed for the professional distillation of whisky, gin, rum and other spirits.
🥃 Usable capacity of 250 litres (280 litres total), with an approximate yield of 25–40 litres per distillation.
🔺 Features a conical still head to promote rectification during distillation and help enhance the aromas.
🔥 Made from 2.5 mm hammered copper, with a professional gas burner and a high-performance tubular condenser.
✨ Made to order
📩 Request your personalized quote
⏱️ Check delivery times