- -10%
⚗️ The 250L GAS Distillery is designed for professional distillation of gin, whisky, rum and other spirits.
🥃 250-litre usable capacity (280-litre total capacity), with an approximate yield of 25–40 litres per distillation.
🔥 Equipped with a professional gas burner, high-performance tubular condenser, automatic cleaning system and monitoring instruments.
🔨 Made from 2.5 mm hammered copper, with customisation options available before manufacturing begins.
✨ Made to order
📩 Request your personalized quote
⏱️ Check delivery times
Security Policy
Delivery Policy
Return Policy
⚗️ The 250L GAS Distillery is specifically designed for the professional distillation of gin, whisky, rum and other spirits. Manufactured using high-quality materials and fitted with comprehensive equipment, it provides the features required for large-scale production.
This model can be customised according to each customer's preferences and requirements, provided that any modifications are requested before manufacturing begins.
The distillery is made from 2.5 mm hammered copper sheet, giving it strength and an elegant appearance. The handles and nuts are made from polished brass, and all joints are soldered to ensure a solid, durable construction.
🥃 Total capacity: 280 litres.
🥃 Usable capacity: 250 litres.
⏱️ Distillation time: approximately 5–6 hours.
📈 Yield: 10–15% of the usable capacity, equivalent to approximately 25–40 litres per distillation.
These yield figures are based on a fermented wash with an alcohol content of 10% ABV.
🌡️ Vertical thermometer, 0–120°C: fitted to the boiler to monitor the temperature of the wash.
🌡️ 2 large thermometers, 0–120°C: one fitted to the still head to monitor vapour temperature during distillation, and the other fitted to the condenser to monitor the cooling process.
🛡️ Safety valve: fitted to the boiler to protect the equipment against excessive pressure.
Pressure gauge on the boiler to monitor internal pressure.
🧼 Automatic cleaning system: installed in the boiler and still head to facilitate internal cleaning of the equipment.
🔍 4 inspection sight glasses: two on the boiler and two on the still head, made of stainless steel and designed to allow the inside of the equipment to be viewed during the distillation process.
Boiler discharge outlet with a 2.5-inch valve, made from stainless steel or brass, for emptying the remaining product.
Brass connections between the boiler and still head to ensure a perfect seal.
🚪 Boiler access door: made from stainless steel, allowing easy access to the inside of the equipment.
❄️ High-performance tubular condenser: designed to reduce distillation time and provide greater control over the cooling process.
🥃 Alcoholmeter, 0–100°, with thermometer: allows the alcohol strength of the distillate to be measured.
Alcoholmeter holder with a tempered glass dome, making alcohol strength measurements easier.
🔥 Professional gas burner, 60 cm in diameter: compatible with butane, propane or natural gas, according to the customer's preference.
Iron supports for the boiler and condenser.
This distillery is made to order. The estimated manufacturing time is 30–45 days.
The equipment can be customised according to the customer's requirements, provided that any modifications are agreed upon before manufacturing begins.
FICHA TÉCNICA
Download (828.5KB)TECHNICAL SHEET
Download (763.16KB)FICHE TECHNIQUE
Download (787.34KB)DATENBLATT
Download (788.32KB)SCHEDA DATI
Download (748.48KB)
⚗️ The 250L GAS Distillery is designed for professional distillation of gin, whisky, rum and other spirits.
🥃 250-litre usable capacity (280-litre total capacity), with an approximate yield of 25–40 litres per distillation.
🔥 Equipped with a professional gas burner, high-performance tubular condenser, automatic cleaning system and monitoring instruments.
🔨 Made from 2.5 mm hammered copper, with customisation options available before manufacturing begins.
✨ Made to order
📩 Request your personalized quote
⏱️ Check delivery times