- -10%
⚗️ The 500L Distillery with AGITATOR + STAINLESS STEEL CLADDING is designed for the professional distillation of gin, whisky and rum. It features an agitator with ATEX certification installed in the boiler, which stirs the wash and helps facilitate alcohol evaporation.
🥃 Useful capacity of 500 litres (550 litres total capacity), with an approximate yield of 50–75 litres per distillation and an average working time of 6–8 hours.
🔨 Made from 2.5 mm thick hammered copper, it features an outer AISI 304 stainless steel cladding that contributes to thermal insulation and provides support and stability to the boiler.
✨ Made to order
📩 Request your personalized quote
⏱️ Check delivery times
Security Policy
Delivery Policy
Return Policy
⚗️ This professional distillery is specifically designed for the production of gin, whisky and rum. It combines a hammered copper boiler with an agitator and an outer AISI 304 stainless steel cladding.
🥃 The boiler has a total capacity of 550 litres and a useful capacity of 500 litres. With a starting fermented wash of approximately 10% ABV, the estimated yield is 10–15% of the useful capacity, equivalent to around 50–75 litres per distillation. The average distillation time is approximately 6–8 hours.
🔨 The boiler is made from 2.5 mm thick hammered copper. The handles and nuts are made of polished brass, and the joints are welded. The outer AISI 304 stainless steel cladding contributes to thermal insulation and provides additional support and stability to the boiler.
⚙️ The integrated agitator is ATEX-certified. It is designed to stir the wash during the distillation process, facilitate alcohol evaporation and help reduce working time. ATEX certification applies exclusively to the agitator and not to the entire distillery.
🌡️ For temperature monitoring, the distillery features a vertical thermometer on the boiler, with a range of 0 to 120 °C, to monitor the wash temperature, as well as two additional thermometers with the same range on the still head and the cooler, to monitor the temperature of the vapours and the cooling process respectively.
🛡️ The boiler is equipped with a safety valve and a pressure gauge to monitor internal pressure. The distillery also includes an automatic cleaning system in the boiler and still head, as well as stainless steel sight glasses that allow the distillation process to be observed.
🔧 The equipment includes a discharge pipe with a 2.5" stainless steel or brass valve, brass connections between the boiler and still head to ensure a tight seal, and a stainless steel access door that provides convenient access to the inside of the boiler.
❄️ The distillery features a high-performance tubular cooler and an alcoholmeter with thermometer to measure the alcohol content of the distillate. It also includes an alcoholmeter holder with a tempered glass dome.
🔥 The professional gas burner has a diameter of 70 cm. It can be configured, according to the customer's preference, to operate with butane, propane or natural gas.
🏗️ The cooler is supplied with an iron support that provides greater stability. The outer stainless steel cladding also helps support and stabilise the boiler.
🌡️ The AISI 304 stainless steel cladding helps thermally insulate the boiler and optimise energy consumption.
📋 Technical specifications and equipment:
⚗️ Total capacity: 550 litres
🥃 Useful capacity: 500 litres
🔨 Material: 2.5 mm thick hammered copper
✨ Outer boiler cladding: AISI 304 stainless steel
⚙️ ATEX-certified agitator (certification applies exclusively to the agitator)
🌡️ Three thermometers with a range of 0 to 120 °C
🛡️ Safety valve and pressure gauge
🧼 Automatic cleaning system in the boiler and still head
👁️ Stainless steel sight glasses
🔧 2.5" stainless steel or brass discharge valve
❄️ High-performance tubular cooler
🥃 Alcoholmeter with thermometer and holder with tempered glass dome
🔥 70 cm professional gas burner, suitable for butane, propane or natural gas
🏗️ Iron support for the cooler
⏱️ Average distillation time: 6–8 hours
🥃 Approximate yield: 50–75 litres per distillation, based on a wash of approximately 10% ABV
📦 Made to order: the manufacturing lead time is approximately 30–45 days. Modifications and customisations can be requested, provided they are communicated before manufacturing begins.
FICHA TÉCNICA
Download (686.27KB)TECHNICAL SHEET
Download (698.47KB)FICHE TECHNIQUE
Download (700.28KB)DATENBLATT
Download (745.23KB)SCHEDA DATI
Download (692.87KB)
⚗️ The 500L Distillery with AGITATOR + STAINLESS STEEL CLADDING is designed for the professional distillation of gin, whisky and rum. It features an agitator with ATEX certification installed in the boiler, which stirs the wash and helps facilitate alcohol evaporation.
🥃 Useful capacity of 500 litres (550 litres total capacity), with an approximate yield of 50–75 litres per distillation and an average working time of 6–8 hours.
🔨 Made from 2.5 mm thick hammered copper, it features an outer AISI 304 stainless steel cladding that contributes to thermal insulation and provides support and stability to the boiler.
✨ Made to order
📩 Request your personalized quote
⏱️ Check delivery times